How does the regulator work?
Release time:
2024-04-25
Source:
Voltage regulator is used to adjust the circuit and control circuit, power supply for the machine to make it work normally, then we will look at the type and working principle of the voltage regulator.
First of all, the principle of single-phase direct voltage regulator. Single-phase direct voltage regulator is composed of the principle of autotransformer. It should be noted that when the input voltage is set, if the output point is higher than 220V, the transformer will automatically work in the step-down state. However, if the input voltage is lower than 220V, the transformer will automatically work in the step-up state. This regulator is different from the transformer mainly in that the input point A can slide arbitrarily from 0V to 250V, so we can adjust the input point of the input voltage at any time to meet the constant voltage.
Secondly, the working principle of the three-phase voltage regulator. The working principle of the three-phase voltage regulator is to connect three relatively stable voltage units to use, as long as the voltage is stable output. The three sliding arms of the three-phase voltage regulator are independently adjusted by a motor, so the regulator is a three-phase split regulator, which means that their working principle is exactly the same as that of a single-phase regulator.
Regulator is how to ensure continuous output? Here we will use the professional terminology to explain the regulator in the process of voltage regulation by moving the carbon brush to change the number of turns of the contact coil to achieve, in this particular note is required to always maintain contact with the coil in the adjustment, otherwise it will immediately power off.
Also, household AC voltage regulators are generally simple. It adds a control winding to a transformer, and then applies a direct current to the winding through these. After that, the core of the transformer will reach a semi-saturated state today, and the size of the DC control current is adjusted. In this way, the core can be adjusted to enter a saturated state to adjust the output voltage.
Generally speaking, the working principle of the voltage stabilizer is actually the same as that of the sliding rheostat. The voltage across the electrical appliance is changed by adjusting the number of turns of the connected resistance wire.
Next Page