Three phase voltage is too low with the regulator useful?
Release time:
2024-04-25
Source:
Voltage instability can be solved with a voltage regulator, the answer is yes, the voltage regulator can solve the problem of low voltage. However, when purchasing a voltage regulator, it is necessary to test the voltage fluctuation value of the region. When purchasing a voltage regulator, the voltage regulation range of the voltage regulator must be greater than the voltage fluctuation value of the region.
What is the effect of low voltage on equipment?
Low voltage will reduce the capacity of power transmission and transformation equipment, reduce the charging power of transmission lines, cause large-scale power outages, shorten the service life of equipment, and even burn out electrical appliances.
When the voltage is too low (below 5%), the motor becomes shorter, and the voltage square relationship decreases, which makes the starting torque drop a lot, and the motor is difficult to start (slow or even not start);
Second, if the load of the running motor is constant (under heavy load or rated load), the rotor should maintain the necessary electromagnetic shortening to balance the resistance torque of the load.
This forces the rotor current to increase, causing the stator current to increase, causing the motor to overheat, increase the temperature rise, shorten the life of the motor, and even burn the motor.
There are many cases of low-voltage start-up operation of the motor, and the load should be reduced as much as possible or used intermittently. The motor voltage is generally allowed to fluctuate within the range of 10% ~-5%. If the power supply voltage is 380 volts, the motor is allowed to run for a long time between 418 and 36 volts.
Solution for low equipment voltage
1. In addition to thickening the incoming line, it is also necessary to check whether the power factor of the electrical equipment is relatively low, resulting in an increase in line voltage drop. If it is the power factor, reactive power compensation is good.
2. It can also carry out energy-saving transformation on some equipment and replace the motor efficiently. Energy-saving equipment consumes less power and can solve the problem of low voltage.
3. Install the three-phase automatic compensation power regulator, which is an automatic self-coupling adjustable transformer. This device can stabilize the insufficient voltage. Improved higher power compensation.
Is it useful to use a voltage stabilizer for low three-phase voltage?
One of the functions of the voltage regulator is to control the output voltage of the electrical appliance with large current fluctuations within a certain range, so as to ensure the smooth flow of the circuit and the normal use of the electrical appliance. Voltage instability can be solved with a voltage regulator, the answer is yes!
If the three-phase voltage is too low to exceed the voltage regulation range of the regulator, please use the end boost booster, the effect is better than the regulator, the regulator will protect itself when the three-phase voltage is too low, no output voltage.
Previous Page
Next Page